Τιμή χωρίς Φ.Π.Α: 60.00

(74.40 Με Φ.Π.Α)
90 ημέρες
30000 Πόντοι

Product Introduction

KangerTech EMOW Mega Starter Kit is the latest electronic cigarette kits from KangerTech. The kit comes with a 1600mAh VV battery and 2.8ml clearomizer. 5 colors for your selection. Both the battery and clearomizer are newly designed with Stainless Material. It will bring you new vaping experience than ever.


Capacity: 2.8ml

Length(battery and cartomizer)* Diameter : 169mm* 19mm

Variable Voltage: 3.2v to 4.8v

5 colors available: Black, Blue, Brown, Cherry Red and Steel

4 plug types available:US plug, EURO plug, UK plug and Australia plug

The kit comes with

1x EVOD VV Battery 1600mAh

1x Decorative ring

1x EMOW Mega Clearomizer 2.8ml

1x Authority Card

1x Wall Adapter

1x USB cord

6x Upgrade dual coil (1pc pre-installed)

Simple packing. Customary Packing from the factory,the packing is subject to change without notice.

Detailed Introduction

Embedded metal button. Air control valve V2. Variable Voltage


1. Upgraded dual coil (made of stainless steel )

2. Air control valve V2

3. New EMOW Mega Atomizer

4. Battery:1600mAh Variable Voltage

5. Liquid capacity: 2.8ml

6. 5pcs extra replacement dual coil unit

Operation Guide

1) How to turn on the battery?

The EMOW Mega battery comes with 5-click protection: Generally, the battery is shipped in the off position. In off position, the battery will not function even when pressing the button. To turn on battery, press manual button 5 times within 2 seconds. You will see the LED blink 3 times. To turn off the battery, press the manual button 5 times within 2 second as well, the white LED will also blink 3 times!  "5-click protection" can protect the battery from being activated when you do not want or do not use it. No more firing in your pocket!

2)How to adjust the output voltage?

The battery allows you to adjust voltage output from 3.2v to 4.8v by spinning the knob at the bottom. You can adjust the output voltage so easily and enjoy the whole vapor time.

3) Charging

When the battery power is low, the battery LED flashes 15 times continuously while pressing the button, pls get the battery charged immediately.

To charge the battery, pls gently screw the battery into the USB charger. Plug the USB charger into the USB port of an AC-USB  charger or a computer. It takes about 4 hours to fully charge the battery.


1.You should use only the dedicated USB charger for the battery.

2. Pls Fully charge the battery before using to maintain a good battery life span.

4) How to fill in e-juice?

1. Turn upside down the clearomizer, then screw off the connector.

2. Use the syringer or dropper to fill less than 1.8ml e-Liquid. Do not overfill it.

3. Carefully screw on the connector, connect it with the battery and enjoy it.

5) How to control the Airflow?

When the hole and groove are overlapped, rotate the hole from left to right to get bigger airflow which reaches the Max on the rightest side. If the hole and the groove are not overlapped, the airflow is locked and no vapor comes out.

6) How to replace the coil unit/coil head?

Turn upside down the cartomizer, then screw off the connector. Take out the old coil unit from the bottom base, replace with new one. So easy!

7)How to remove your BDCC cartomizer from battery?

Hold bottom of the cartomizer when you separate it from battery. Please do not screw the cartomizer from the top or middle of the cartomizer, just in case the e-liquid pour out.